Page 178 - Fegime - Electrical Product Guide
P. 178

   ENERGY CONTROL
Sensors & Switches
                                Compact Person Detector Switch
• Ideal for all night security - switches lights on when somebody is detected and off when nobody has been detected for a chosen period.
• Ideal for outdoor mounting.
• Photocell may be adjusted so lights do not
turn on during daylight.
• Compact IP66 rated polycarbonate moulding.
• Switches up to:
2A (500W) of LED lamps & fittings
6A (1500W) of resistive or fluorescent load.
Compact Person Detector Switch Grid Time Lag Switches
• Suitable for MK Grid Plus.
• 2-wire - no neutral required.
• Adjustable time lag (1-120 minutes).
• Switches up to:
2A (500W) of LED lamps & fittings
6A (1500W) of resistive or fluorescent load.
• GRTL MK ILM has illuminated push button
for easy location in the dark.
• Other options for Crabtree grid and
Eurodata plates available.
• Minimum load: 40W resistive.
Grid Time Lag Switch, 2-Wire Grid Time Lag Switch with Illuminated Push Button, 2-Wire
Push LED Dimmer Switch Module - Leading Edge
• Suitable for retrofitting onto existing plates.
• Adjustable spindle control to specify minimum
dim level - helps minimise lamp instability.
• Compatible with many LED lamps and fittings.
• Push On, Push Off, with rotary dimming control.
• Can be used in 1 or 2 way switching circuits.
LED Dimmer Switch Module
Twilight Switch
• Ideal for all night security - switches lights on at dusk and off at dawn.
• Ideal for outdoor mounting.
• Photocell may be adjusted so lights do not turn
on during daylight.
• Compact IP66 rated polycarbonate moulding. • Switches up to:
2A (500W) of LED lamps & fittings
6A (1500W) of resistive or fluorescent load.
Twilight Switch
Exterior Time Lag Switch
• Designed to switch heating or other loads, ON, and then to switch them OFF automatically after the set time lag has elapsed.
• Illuminated touch area for easy location in the dark.
• IP66 rated polycarbonate moulding.
• Switches up to 16A (4000W) of quartz
heaters, or 12A (3000W) fluorescent load.
• Adjustable time lag (2 - 20 minutes).
Exterior Time Lag Switch - 16 Amp
Quiet Grid Dimmer Switch Modules - Trailing Edge
• Suitable for most mains dimmable LED lamps and fittings and mains halogen lamps.
• Loading: 40-400W Resistive, mains halogen or dimmable electronic transformer loads.
• Loading: 10-200W LED lamps and fittings (varies according LED driver manufacture).
• Lights can be switched and dimmed from several locations using matching slaves.
Quiet Grid Dimmer Module - Suitable for MK Grid Plus Quiet Grid Dimmer Module - Suitable for Crabtree Grid
Quiet Grid Dimmer Module - Suitable for Eurodata Plates
Plated Time Lag Switches
• Ideal for replacing an existing wall switch. • 2-wire - no neutral required.
• Adjustable time lag (1-10 minutes).
• Switches up to:
2A (500W) of LED lamps & fittings
6A (1500W) of resistive or fluorescent load.
• TLSW 10ILM has illuminated push button for
easy location in the dark.
• Minimumload:40Wresistive.
Time Lag Switch, 2-Wire Time Lag Switch with Illuminated Push Button, 2-Wire
Plated Push LED Dimmer Switch - Leading Edge
• Adjustable spindle control to specify minimum dim level - helps minimise lamp instability.
• Compatible with many LED lamps and fittings. • Push On, Push Off, with rotary dimming
control.
• Can be used in 1 or 2 way switching circuits.
1 Gang LED Dimmer Switch Load Resistor
Part No.
Description
Part No.
       COPD
TWSW
Description
Part No.
   TLSW 10
Description
       Description
TLSW 10 ILM
     Part No.
    EXTLSW 16A
  Part No.
 GRTL MK
Description
    GRTL MK ILM
Part No.
Description
    DP1D LED
      Part No.
DQDGD MK 400W
Description
• •
Suitable for eliminating lamp instability and flicker when dimming non-resistive loads such as mains dimmable LED lamps and fittings. Can be passed through a 63mm diameter cut out.
Load Resistor
      Part No.
Description
DQDGD CB 400W
Part No.
Description
   DQDGD EU 400W
      RESLOADE
 DPD LED
       178
Together we generate value
      
   176   177   178   179   180