Page 236 - Fegime - Electrical Product Guide
P. 236

 FIRE & SECURITY
Smoke & Heat Alarms
        Serious about Safety, Passionate about Protection
Kidde Safety is one of the world’s leading manufacturers of smoke, heat and carbon monoxide alarms and other fire safety products.
All alarms are manufactured in Kidde’s own factory and every alarm is individually tested before supply. Kidde alarms are approved to the highest British and European standards and are BSI Kitemarked.
When choosing to specify and install Kidde alarms remember:
• There should be at least one smoke alarm on every floor of the property, particularly in areas that may be an escape route.
• Select the most appropriate alarm for the location (see below) to avoid nuisance alarms and have the maximum effect.
• A CO alarm should be installed near any fuel-burning appliance such as a central heating boiler, gas fire or log burner. Be sure to install it around 1.5 metres up from the floor on the wall, or free-standing on a shelf or bookcase for best detection.
      Kidde Firex 230V Smoke & Heat Alarms
 Kidde Firex smoke and heat KF10 alarms can interlink with up to
23 other Kidde Firex alarms –
all alarms sound if danger is
detected. They have reduced energy
consumption for lower lifetime running costs.
All Kidde Firex hard-wired alarms have a 6-year warranty.
* compared to previous Firex alarms
                 • Ionisation Alarms are ideal where a fast-flaming fire may occur, say from electrical equipment.
• Optical Alarms are better for slow, smouldering fires, from PVC cabling, soft furnishings and bedding.
• Heat Alarms are designed for humid, dusty or high ambient temperature locations such as kitchens, garages, unconverted lofts.
Kidde Firex Ionisation Smoke Alarms
   •
•
Kidde Mains Accessories
for use with all Kidde interlinked smoke, heat and CO alarm systems
RBUN Trigger Input and Relay Module Base
Any connected triggered closing relay (eg sprinkler switch) causes activation
REMTH Remote Test & HushTM Unit
Allows separate one man testing or ‘hushing’ of all interconnected alarms
Part No.
KF10R
Description
Ionisation with Test & HushTM + Base Plate Ionisation with Test & HushTM + Base Plate
Ionisation with Test & HushTM + Base Plate
Mains + 9V Alkaline Mains + 9V Lithium
Mains + Lithium Cell
Power Source
 KF20
KF10
 KF10LL
      Kidde Firex Optical Smoke Alarms
Part No.
 KF20
Optical with Test & HushTM + Base Plate Optical with Test & HushTM + Base Plate
Optical with Test & HushTM + Base Plate
Kidde Firex Heat Alarms
Heat with Test & HushTM + Base Plate Heat with Test & HushTM + Base Plate
Heat with Test & HushTM + Base Plate
Mains + 9V Alkaline Mains + 9V Lithium
Mains + Lithium Cell
Mains + 9V Alkaline Mains + 9V Lithium
Description
Power Source
 KF20LL
  KF20R
   Part No.
 KF30
KF30LL
Description
Power Source
  KF30
  KF30R
Mains + Lithium Cell
    236
Together we generate value
        

































   234   235   236   237   238